New seal mill
Functions: can crush items of various drugs, finished powder.
2, Fineness of 80 - 300 mesh.
3, productivity, motor power, motor shaft speed and other technical parameters on the product label shall prevail.
Structural characteristics of
1, The machine consists of motor, blade, electrical components, with the advantages of small size, attractive appearance.
2, the biggest advantage of this machine lies in the grinding chamber and the lid is not a traditional threaded design, instead of using ring seal screw-free design, very easy to cover co-definitely not the card bowls phenomenon appears, the operation more convenient.
3, the new swing-mill has a total of six models 200g/300g/400g/500g/800g/1000g.
Method of operation
1, the cover is open, load the crushed material.
Tighten the cover and tighten the lock nut.
Power, turn on the switch, the boot operation,
Concern about the power and unplug the power outlet.
5, open the cover, pour the powder.
Note
(1) powder as a substitute inputs do not cross the crushed bowl capacity 1/2.
2 of dry material grinding more fine. Should not be processed wet and fat items
Just machines, if the encounter smash things stuck blades, the motor will not operate properly, they should immediately turn off the power to prevent motor damage, clean-up to work again
4 herbs crushed just one minute, special needs longer. Grinding time should not be too long, to prevent the powder heat stick smash the bowl.
5, the machine can not be a long time of continuous work, not to cross five minutes each, the number of processing a long time, in the middle must rest to prevent the motor bearings to overheat resulting in motor damage.
6, prolonged use, the normal inspection of the brush and blade wear. Replacement parts, as the case
7, to prevent the machine fell to the ground to damage the machine should be placed relatively stable table
8, if the motor does not work, check the line or check the fuse
9, the cover is open, do not start work
10, warranty for one year (excluding motor) |
