Stainless steel dust grinder
All stainless steel, 304, compliance with GMP requirements
A. Stainless steel dust grinder use:
Crushed materials in the pharmaceutical, chemical and food industry.
Two. How it works:
Native use of the relative motion of the activities gear and fixed gear, or high-speed impact of the hammer material, knock, collide, collision, and the materials between the role, so that the crush cavity material to be broken, crushed. This machine is equipped with screen, the screen can be replaced according to customer requirements, when the material is crushed to less than the sieve diameter, the powder out from the sieve, falling into the bottom of the set of drums, and the dust flying in the barrel be inhaled through the dust of the motor role of dust inside the dust bag filter, exhausted to the outside air by the fan.
Three. Machine features:
A. Simple structure, crushing chamber loaded, the dissolution of simple, easy to clean.
Two. Smooth operation, low noise and little vibration.
3. Easy to operate. Replacing the screen can control the particle size.
Four. Note:
A. External power supply, the machine should be based on the power of the machine to install the appropriate circuit breaker is automatically cut off power to protect the motor when the machine load is too large, the current is too large!
(2) of this machine at work to ensure that supervised.
3. Crushed material particles should not be too large, the case of the boring machine (the machine load is too large to stop running speed significantly slow or passive) should be immediately cut off the power.
3. If the crushed particles are too large, should have to go through the universal crusher broken, and then the machine crushed. |
